Kraft paper adhesive tape: it is suitable for bonding chloroprene, EPT and other vulcanized rubber with metal and plastic materials; the special adhesive for rubber used in VR-5311 has excellent cohesion; VR-5321 has excellent initial adhesion.
Double-sided adhesive tape: it is suitable for bonding chloroprene, EPT and other vulcanized rubber with metal and plastic materials; the special adhesive used for rubber has excellent agglutination force; it has excellent initial adhesion.
Masking tape for printed circuit board: it has micro rewinding property and is easy to paste; special adhesive is used, so it can be tightly pasted on printed circuit board without peeling and deviation during operation; after being compacted with heating roller, it can play a better adhesion; it has good solder resistance and flux resistance, which can prevent the immersion of solder liquid; it can be used in severe conditions It can be used under the condition of using, and there is no adhesive left; the change of adhesive force is small after pasting, and the stripping operation is easy and simple.
Notes on the use of industrial tape
1. The tape shall be stored in the warehouse to avoid the sun and rain; it is forbidden to contact with the organic solvent of acid-base oil and keep it clean and dry. The room temperature is between - 15 ℃ and 40 ℃ 1m away from the discovered device.
2. The tape shall be placed in rolls without folding and shall be turned once a season when it is stored too long.
3. Do not make the belt snake or wriggle, keep the idler, the vertical roller is flexible, and the tension should be moderate.
1. In case of early damage to the tape during use, the clause shall be found and repaired in time to avoid adverse consequences.